GN Oil Drilling Solids Control Equipment

GN Solids Control equipment is actually popular within the refinement as well as recycling where possible associated with slurry for that building business. GN Solids Control is actually becoming increasingly essential associated with civil building because it not just may reduce construcion price, but additionally may slow up the air pollution from the atmosphere.

There’s a Backflush device set up within the electric outlet from the slurry pump motor, associated with dirt storage space trough. It may agrivate the actual depositing contaminants, in the event of any kind of silting-up within dirt storage space trough. Within the dirt blood circulation procedure, there’s a liquids degree drift in between dirt storage space container as well as dirt storage space trough, it may stability the actual liquids degree. 

GN Solids Control Company may be the the majority of expert gear producer with regard to strong manage gear as well as drilling waste materials administration. Depending on several years encounters with this area, GN Solids Control is promoting the actual small desanding grow with regard to adding companies with regard to little adding tasks.

GNs drilling  mud  system  would be the dirt combining models that popular within oilfield drilling mud system . The different dimensions as well as designs associated with GNs dirt agitator provide many selections with regard to customers. The actual agitators is actually installed along with the actual dirt and it has a couple of impellers submerged within the drilling dirt. You will find 3 kinds of impeller: Toned Impeller, Canted Impeller as well as Shape Impeller. GNs agitator usually make use of cantd impeller that blend as well as postpone the actual solids utilizing each axial as well as radial moves.

Every Dirt agitator is made for the particular software. Whenever we style the dirt agitator, Whenever we provide dirt agitator to the customers, all of us style the actual dirt agitator consider guidelines for example, Dirt Container dimension, container level, as well as Dirt Features. GN in a position to provide bespoke dirt agitators. Based on customers needs, GN will offer you the best option agitators.GN mud system Functions & Advantages

1) Small style. Peaceful, sleek, vibration free of charge.

2) Long lasting, solitary decrease earthworm equipment generate.

3) Less shifting components, much less upkeep.

4) Immediate, flexi-couple generate program.

5) C-Face Surge evidence electric engine. ATEX, IEC Former mate, as well as Sea Engines region readily available for choice.

6)GN Unique created impeller totally produced from throwing to possess much better combining overall performance.if  you  want  to  review more information contact here

http://www.gnsolidsamerica.com/contact.html

¿Qué es la perforación de pozos de agua?
Un pozo de agua es una excavación o estructura creada en el suelo por la excavación, la conducción, aburrido, o perforar para el acceso de las aguas subterráneas en los acuíferos subterráneos. El agua de pozo es dibujado por una bomba, o el uso de recipientes, tales como cubos, que se crían de forma mecánica o con la mano.
Los pozos de agua perforados normalmente se crean usando la parte superior de la cabeza de perforación rotatorio del estilo, mesa de perforación rotatoria, o máquinas de perforación de herramientas cable, todo lo cual se deriva el uso de perforación que se volvió a crear una acción de corte en la formación, por lo tanto, la perforación plazo.

Sistema de limpieza de lodo para la perforación de pozos de agua:

1. El tratamiento de la capacidad: la limpieza de lodo 1000GPM.
2. Dos tanques de lodo, un tanque de reciclado, un tanque de almacenamiento y mezcla
3. Dos zarandas de movimiento lineal GNZS703E-DZ y un limpiador de lodo GNZJ703E-2S12N.
4. Tres bombas centrífugas, una para desarenador, una para desilter, y una bomba de mezcla.
5. Ambos tanques de lodo están equipados con sistema elevable para levantar el depósito de lodo sin necesidad de contratar una gran grúa.

El cliente utiliza el sistema de limpieza del lodo de perforación que hacer metano de carbón y agua de perforación de pozos en Quesland, Australia.

GN Decanter centrifuge is utilized to remove solids in oilfield drilling operation to achieve drilling fluids purification system. Decanter centrifuge is also named as horizontal screw discharge or sedimentation centrifuge, and is the special solids control equipment to conduct liquid separation. It is normally applied as fourth stage equipment; the first stage is shale shaker, then desander and desilter.  Desander, desilter and shale shaker are in one unit for the mud cleaner. In oilfield drilling, there are normally two sets of decanter centrifuge for sale to purify the  fluid.

1) The first centrifuge is with middle speed, G force around 700~1000 and speed roughly 2000RPM.It mainly used for recovering barite which is an expensive material for drilling mud. The recovered barite will not be discharged and turned back to the drilling rig mud system. A high performance decanter centrifuge with the effective barite recovery contributes to reduce the drilling cost and increase drilling efficiency

2) The second decanter centrifuge is used for the treatment of the drilling cuttings. It is mainly used to separate fine solids from the low gravity solids mud. Technically, it is used to downstream from vertical cutting dryer after high-G shaker.

Normal
0

7.8 磅
0
2

false
false
false

EN-US
ZH-CN
X-NONE

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:普通表格;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:””;
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:auto;
mso-para-margin-right:0cm;
mso-para-margin-bottom:auto;
mso-para-margin-left:0cm;
line-height:150%;
mso-pagination:widow-orphan;
font-size:10.5pt;
mso-bidi-font-size:11.0pt;
font-family:”Calibri”,”sans-serif”;
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-font-kerning:1.0pt;}

Equipos de tratamiento de cortes de perforación se está volviendo más y más importante para la empresa de servicios petroleros o de la empresa de perforación. Ellos usan el equipo para el tratamiento de los cortes de perforación dados de alta de línea de equipos de control de sólidos, incluyendo zarandas, desarenador, deslimador. Como muchos clientes quieren usarlo de una manera flexible, unidad móvil de tratamiento de recortes de perforación es popular.

GN solids control unidad móvil de tratamiento de cortes de perforación ha sido probado por muchos clientes. La unidad puede ser utilizado tanto para el lodo a base de aceite y agua a base de barro.

Configuración básica de GN unidad móvil de tratamiento de recortes de perforación

    2 Transportador Helicoidal GNSC14A-24

    1 Secador Vertical de Recortes (Secador de Recortes, Vertical-G Secador) GNCD930LC-VFD

    1 Alta fuerza-G Zaranda secadora GNZS594HGE-LD

    1 Centrífuga decantadora Alta velocidad GNLW363BG-VFD

1 Bomba de Tornillo, bomba de desplazamiento positivo, Alemania marca Netzsch

    1 tanque de lodos con 2  compartimentos

1 semi-remolque, marca CIMC, buena calidad pero precio razonable

Si para el agua a base de barro, sólo tenemos que sustituir el secador vertical de recortes para alta fuerza-G zaranda secadora. Fuimos, algunos clientes utilizan alta fuerza-G zaranda secadora por tanto aceite a base de lodo y  agua a base de lodo para reducir el costo de producción.

The Swaco variable speed 518 centrifuge has the control flexibility to delivereffective solids/liquids separation for the varying conditions encountered through out most drilling programs. Infinitely adjustable main Decanter Centrifuge and conveyor speeds coupledwith the ability to increase or decrease conveyor differential , provide completecentrifuging ra nge capability with a single unit.

shale shaker speed can vary from 0 – 3250 rpm to increase particle separation
(cutpoint) for improved solids removal and cleaner effluent.
Differential speed can be regulated to improve solids conveyance or obtain
dryer discard through the variable speed panel.
Main bowl and conveyor speeds are infinitely controllable within specified
operating ranges.
The liquid radius in the decanter can be changed to obtain either a wet/dry
solids discard or cleaner effluent.
Speed adjustments are done through the Variable Frequency Panel that is
separate from the centrifuge.
Bowl torque monitoring adjusts pump speed to eliminate plugging of unit.
Increased horsepower and coffin modifications allow for feed rate volumes
up to 800Lpm.
Heavy duty 50 Hp main drive motor replacing the 30 Hp.
20 Hp motor on back drive replacing the 7.5 Hp.
New tie down lid , required only one wrench and no nuts and bolts.
Simple start / stop switches for easy start up and shut down of centrifuge and
pumps.
Cost Effective
The VS 518 effectively removes the finest of silts and returns the expensive
fluid for re-use within the system. Minimizing cost for make up fluids ,
dilution , cleanup and disposal..

The dust on the casing should be cleaned periodically.Before operation the fix bolts of the motor should be checked to see if they are loosened. If so, they should be fixed tightly before use.

Check to see if the service cable is rubbed, buried or squeezed.A good lubrication of the drilling waste management should be ensured during their operation.An appropriate amount of high temperature lubricating grease LGHP2 by SKF was injected for the bearing before its assemblage, with it’s working temperature between -40～200°C.No less than 25.8g lubricating grease LGHP2 should be injected into each bearing for every 2000 hours.

 When Mud Cleaner is found that temperature of the bearing is 10℃ higher than its average daily temperature (meaning that the so-called risen temperature is that measured at the bearing location of motor casing on-the-spot subtracts from the outside environmental temperature) in 2000hours, Mud Agitatorshows that the bearing is lacking of lubrication, the lubricating period and the amount should be both reduced.

Gnsolidsamerica is the author of the article on drilling waste management and mud system,find more information about http://www.gnsolidsamerica.com/drilling-mud-circulating-system.html.

mud agitator manufacturer STRUCTURE and MAIN PARTS Refer the drawing below to find more details of the structure. The main parts is: main vessel, pipeline for mud and gas, structural basement, pressure gauge valves and adapters and so on. Manhole is on the vessel, for maintaining or repairing. SN Des. PN QTY 1 Main vessel GNZYQ1000-01 1 2 Valve 16DN250DD3 1 3 Nipple DN250DC-00 1 4 Bolts 8 5 Nipple DN100DC-00 1 6 Valve 16DN100DDB 1 7 Bolts 8 8 Elbow GNZYQ1000-02 1 9 Seal DN200PN10 1 10 Bolts 16 11 Nipple DN200DC-00 1 12 Bolts M24x300 4 13 Pressure gauge YLB100 1 Poor boy degasser structure 7) OVERALL DIAMENTION： II、ASSEMBLE and PREPAARATION 1）Lifting, Transportation, Assembling When lifting, keep the main vessel straight and vertical, keep slowly moving. When transporting, it can be horizontal lying, while have to keep the two legs of the vessel supporting the other side, while one side is the base structure. Usually the poor boy Degasser should be mounted beside the mud tank, under the basement, should be firm and strong, foundation bolt is used to keep the safety, as drawing below. 1、Poorboy degasser base 2、Foundation bolt 3、Concrete ground When assembling, the crane lift the degasser up, slowly and straight to the concrete ground, use wire rope from three direction to keep it firm steady, ensure the main vessel vertically stand, then strength the foundation bolt. 2）Preparation before Operating When it is well assembled, properly arrange the vent line, usually prepared by client. Connect the inlet with BOP or choke manifold. Close the dump valve, open the outlet valve and connect with the shaker or the mud tank. 3) Movement Before move the degasser pls click to know, dissemble the pipeline first, then release the wire rope, lift from the top by crane, loose the foundation bolt. gnsolidsamerica is the author of the article,pls refer Mud Agitator to know more

Normal
0

7.8 磅
0
2

false
false
false

EN-US
ZH-CN
X-NONE

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:普通表格;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:””;
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:auto;
mso-para-margin-right:0cm;
mso-para-margin-bottom:auto;
mso-para-margin-left:0cm;
line-height:150%;
mso-pagination:widow-orphan;
font-size:10.5pt;
mso-bidi-font-size:11.0pt;
font-family:”Calibri”,”sans-serif”;
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-font-kerning:1.0pt;}

GN solids control ha diseñado un sistema compacto de lodo para la perforación de costa afuera. El usuario final es famosa compañía de perforación en Hong Kong. Después de que el cliente compara muchas empresas de control de sólidos en China, que elijan GN Solids control para ser su proveedor.

Los parámetros generales del sistema compacto de lodo:

•     Zarandas, GNZS594E-HB ; 2 SETS

•     Limpia lodos, GNZS594E-3S16N ; 1 SET

•    Desgasificador, GNZCQ360A ; 1 SET

•    Separador de gas tipo “Poor boy”, GNZYQ1000A ; 1 SET

•    Transportador Helicoidal, GNSC12A-24 ; 2 SETS

• Sistema de reciclaje de lodo, Tanques de almacenamiento de lodos, 1 SET

Debido a que este sistema de lodo es para la perforación costa afuera, los motores eléctricos y paneles de control son más altos de clase a prueba de explosión, es diferente con nuestro sistema de lodo de perforación en tierra normal. También debemos obtener el certificado DNV para ello.

Como el principal fabricante de equipos de Control de Sólidos en China, GN solids control han otorgado la buena reputación internacional como nacional. Vamos a desarrollar nuestro equipos y tratar de satisfacer cada vez mayor demanda de los clientes.

GNPS703D Shale shaker Operation and maintenance instruction come from TANGSHAN GUANNENG MACHINERY EQUIPMENT CO., LTD. 1. Summarize 2. GNPS703D Shale shaker structure 3. GNPS703D Shale shaker technical parameters 4. GNPS703D features 5. Lifting, transportation and installation 6. Operation on shale shaker 7. Shale shaker Maintenance 8. Spare parts for GNPS703D 9. Enclosed files for GNPS703D Summarize 1. Decanter Centrifuge is high efficiency shaker. It is designed according to users’ actual demand based on modern technique and principle. GNPS703 takes advantage of double vibration motors in-phase principle. It holding ideal design on structure, and work steadily, operated lasting time without any problem, take rather little cost on maintenance. If choose proper model or parameters, it can work for many kinds of drilling fluid solids control. It is an ideal solution for Oil and gas drilling, HDD, Metallurgy, mining tail mud solids control 2. GNPS703 Shale shaker structure Please find GNPS703 shaker structure as fig I. It contains pedestal, shaker deck, tension wedge, shaker screen, rubber strip, deck adjustment device, baffle box, tension device, electric cabinet, vibration motor, damping spring. Fig I. GNPS703 Shale shaker structure Shale shaker GNPS703 can be used by single or designed as tandem and triplex shaker to be operated at drilling job site 3. GNPS703 Shale shaker technical parameters Model: GNPS703 Vibration: Balanced elliptical motion Vibration amplitude: 7mm (double type) Motor power: 1.0+1.94kW Treating capacity: 150m3/h Screen area: 2.2m2 Screens: 700×1250mm×3 10~200 mesh (Frame screen or Pyramid frame screen) Dimension: 2783×1880×1254mm Weight: 1980kg 4. GNPS703 features (1) GNPS703 Shale shaker is designed as double motors in-phase principle. The shale shaker will vibrate as elliptical, part of spare parts are interchangeable with international shale shaker (2) Adopts advanced vibration motor, reliable operation, run long time without any problem (3) The Decanter Centrifuge can be flat type or pyramid type. Shaker deck can fix 3 pieces screen and make screens as different combination. This will lead screen take longest usable life. According to different drilling mud the screen mesh will be 40-200 mesh,can be flat type or pyramid type. decanter centrifuge for sale can fix 3 pieces screen and make screens as different combination. This will lead screen take longest usable life. According to different drilling mud the screen mesh will be 40-200 mesh, click here to get more information (4) Screen is tensioned by wedge, this is more convenient and reliable (5) The shaker deck can be adjusted. Adjustment will be realized by adjusting worm whirl. There is worm whirl at each side of shaker deck. Middle shaft connect two whirl pipe, when we make adjustment, two sides will be compliant and in-phase (6) The paint of shaker is processed by grit blast, use high anticorrosive zinc rich coating. Will make shaker surface anticorrosive and more beautiful.