Category: Uncategorized

As a supplier of
shaker screens, hydrocyclones, oilfield tools & spare parts supplier, GN
solids America can provide replacement shaker screens for a lot of US brand
shale shaker, mud cleaner, Mission pump, welcome to check with our sales for
the stock.

We sell replacement
screens for Derrick FLC500, 48×30, Brandt Cobra, Swaco Mongoose, etc shale
shakers, mesh size from API40 to API325, with different materials and wire
mesh. We also sell 4inch cone, 10 inch cone for mud cleaners.

Not only for the
spare parts, GN solids also provide oilfield solids control equipments and
drilling waste management equipments, including shale shaker, mud cleaner, high
speed decanter centrifuge, variable speed decanter centrifuge, rated speed
& VFD vertical cuttings dryer, centrifugal pump( equivalent to Mission
pump), mud agitators, hoppers, mud tanks, mud guns, mud gas separators, 9inch
decanter centrifuge for mining diamond core drilling, 18~22inch big bowl
decanter centrifuge for dewatering unit.

Recently we shipped
big qty equipments to international clients and domestic market as below:

1 10 units of 9 inch
up to 4500rpm decanter centrifuge to Canada for core drilling solids dewatering
and water consumption.

2 over 40 units of
GNLW363decanter centrifuges are shipped to Africa service company

3 3 sets of vertical
cuttings dryer, decanter centrifuges are shipped to Sinopec company last week

4  3 sets of drying shaker and VFD decanter
centrifuges are shipped to Sichuan client

5 4 sets of drilling
waste management equipments are shipped to Russia for Baker Hughes project,
including 4 cuttings dryer , 4 decanter centrifuge, several telescopic skid,
several screw conveyors

…and more, GN solids
America take an act as the sales office, after-sales and warehouse of GN Solids
control, welcome to check our stocks in Houston and visit us at OTC 2015 in
Houston. We have various shaker screens in stock for different API mesh size.

Drilling
mud serve as lubricant that keep the drilling bit operate smooth.  The consequence of drill bit overworked by
temperature heading up will lead to hard work of engine and transmission that
lead to breakdown and halt the whole operation.
It is a very costly operation halt that leads cost of extra ten thousand
of dollars and more. Plus, the drilling fluid is also a very costly lubricant
and to keep the drilling cost under control, solids control machinery is need
for filter the debris that contain in the drilling mud for many times of cycle
of use the drilling mud.  The five
machinery that will completely perform filter the solids from the drilling mud
are shale shaker, vacuum degasser, desander, desilter and
decanter centrifuge.

The filter step goes in below:

Shale
shaker

The
drilling mud feed enter the feeding box of shale
shaker.  The mud
contains various size of the solids return to the ground surface and shale
shaker is filtering the biggest solid by use high G force of shaking.  The box of shale shaker contain panels of
mesh screen that is different number of mesh depend on solids contents analyze
by drilling mud engineer

Vacuum
degasser

. The muds
that return to ground surface not only contain solids but also gas from the
earth core.  This gas that change density
of drilling mud leads result change the viscosity of drilling mud. Vacuum degasser
removes the gas in the drilling mud to keep the mud in balance and continue the
future solids filter process.

Desander

The drilling fluids now that
contain medium size solids enter the liquid feeding pump and enter the
desander, which contain large hydrocyclone(s).  The solids diameter above 40-60um will be
filtered and bottom of desander is pair with shale shaker contain finer mesh
compare with first shale shaker to complete the filtering.  T

Desilter

This machinery’s function of
work is just as same like desander in last step before. It contains multiple
smaller hydrocyclones that can remove solids that measure diameter above
15-40um.  It is also pair with shale
shaker like desander and complete this step of filtering.

Decanter Centrifuge

The drilling fluid feed through
centrifugal pump that feed into decanter centrifuge that rotate in High
speed of G force.  The rotating
bowl will separate solids from the mud and exit in one for solids and other one
is for filtered mud.  The drilling mud
now will feed back to the rig for next cycle of usage.

3 phase decanter centrifuge is widely used for crude oil sludge separation to discharge the dry solids and recovery oil as more as possible, at the meantime, the water is recycled for reuse. Before feeding, we need heating the original material to be liquidable.
There are 2 situations:
1 The oil sludge is from oil storage tank bottom or mut pit bottom, most of the sludge is fine solids, by this situation, 3 phase decanter centrifuge could be an option.
2 The oil sludge is from drilling site, most of them are drilling cuttings, GNCD930 vertical cuttings dryer works this way. After separated by GN vertical cuttings dryer, the oil content on the cuttings will be down to less than 5%, in some countries, the solids can be landfilling, the recoverded oil with water, fine solids can be separated by 3-phase decanter centrifuge or GNLW363VFD 2 phase decanter centrifuge to separate the fine solids and get clean oil.  
We have both the vertical cuttings dryer and 2 phase decanter centrifuge stocking in Houston for immediate shipment and customer’s inspection and rental service. Pls contact our sales team in Houston at 713 320 3868/713 878 0880 to arrange for a visit.
Working principal of 3 phase decanter centrifuge:
3 phase decanter centrifuge can separate 3-phase: solids phase, light liquid phase, heavy fluids phase through the process below: With the centrifugal G force, the heavies phase-solids phase is drived by the screw conveyor to small end and discharged from solids discharge port, the solids is dry enough to be shipped by truck. The 2 different density fluids will flow to big end and discharged from different effluent port-heavy fluids port and light fluids port. So the different 3 phase are separated.
GN produced 2 phase separation decanter centrifuge is widely used for drilling fluids treatment for solids control system and drilling waste management system.

Right now GN solids America-the branch company of GN solids control in China, need a sales engineer in our Houston branch. If you have years of experience in oil & gas drilling solids control industry, welcome to contact us and send us your CV.
We required that you must have over 2 years of experience in solids control or drilling waste management company or oil drilling related industry, if not, you must have many years of experience in big equipments sales in US, have the basic knowledge of international sales process and fly to South America countries regularly to visit potential clients and for after-sales service. 

Language: English, Spanish
Job Location: 6710 Windfern Road, Houston, TX 77040

Except for oil & gas drilling, GN equipments can be also applied for the applications below:
1 Drilling Waste Management/ Drilling cuttings treatment
2 Horizontal Directional drilling , underground construction, crossing, road work
3 Other drillings, like geothermal drilling, water drilling, mining drilling, coal bed methane drilling
4 All kinds of Water slurry separation, dredging slurry separation
If you are interested in working with GN solids America, pls email your CV to usa@gnsolidscontrol.com .

We will show our advanced drilling waste management equipments at OTC 2015, D version vertical cuttings dryer and C version decanter centrifuge, with shale shaker and mud cleaner. If you are interested to learn these equipments, welcome to visit our 2 stand at OTC:
Reliant Arena Booth A (290SF) No.: 9225-2    – Hebei GN Solids Control Co.,Ltd
Reliant Arena Booth B (200SF) No.: 6137        – GN Solids America LLC

GN solids control equipments has been improved a lot during these years according the client’ s good suggestion and we take a lot of stock equipments in Houston for immediate shipments for the main equipments, like 4-panel shale shaker, 3 en 1, decanter centrifuge, vertical cuttings dryer, etc. We would like to work with you to get to a bright future together.

GN
solids America( located at 6710 windfern road, Houston, TX 77040) have 2 units
of batite recovery decanter centrifuge in stock in our warehouse for sale and
rent. They are brand new and without motor & control panel, we will apply
proper electric motor and control panel if rquired by the clients. The max
speed of this centrifuge model GNLW452 is 2000rpm, which is normally applied
for barite recovery. The specification is as blow:

No.

GNLW452

Bowl
diameter

18inch

Bowl
length

43inch

Bowl
max speed

2000

Typical
speed

1800

Main
motor power

60HP

Effective
processing rate

176gallons
/ minute

Typical
G force

815

Cut
point

5~7
microns

Differential
speed

32rpm

The
main differences compared with the another popular sold centrifuge model
GNLW363:

Item GNLW452 GNLW363 series
Bowl dia 18inch 14inch
Bowl length 43inch 50inch
Typical bowl speed 1800rpm 3200rpm
application Barite recovery Low gravity solids
Motor power 60HP 65HP
Screw protection Ceremics tiles Tungsten carbide tiles
Bearing brand NSK/FAG SKF

Except
for GNLW452 centrifuge, we also have 1 unit of GNLW453 decanter centrifuge in
stock in Houston warehouse, which can also be applied for baryte recovery.
GNLW453 centrifuge is only for rent, it has the same bowl diameter 18inch, but
the bowl length is 61inch, much longer than 43inch. And GNLW453 centrifuge is
with VFD, it can be used not only for baryte recovery, but also for high
gravity and low gravity solids drilling fluids. And the treating capacity of
GNLW453 centrifuge is 264gpm, much bigger than GNLW452.

Except
for the above mentioned centrifuge, we also have 14inch bowl decanter
centrifuge ( high speed, variable speed) available for rent and sale, and
22inch bowl decanting centrifuge for sale and vertical cuttings dryer for
drilling waste management system.

Welcome
to contact GN solids America sales for an inquiry of barite recovery centrifuge
and solids control shale shaker.

GN brand high speed decanter centrifuge has been used for waste water reclamation in the oil & gas field. The purpose is to help you use less water or recycle more water to save you money, and work in an environment responsible manner.
Oilfield waste water may come from the fluids stream below:
1 onshore drilling
2 offshore drilling
3 oil tank bottom/pit
4 drilling waste management system/facility
Decanter centrifuge act as an important role but not the final in the process of water recycling. It is used to separate the clay and silts from the fluids and dry the solids for disposal. GNLW363CG & CG-VFD decanter centrifuge and GNLW453-CFD, GNLW553-VFD centrifuge can be used for such application.GN have all these centrifuges models available in GN SOLIDS America warehouse located at Houston for sale and rent, pls contact GN sales for an appointment in our warehouse.
GN decanter centrifuge can be applied not only for oil & gas field, but also industry waste water, like dredging slurry separation, pond slurry separation, mining slurry separation, TBM, diamond core drilling waste water, etc. But before feeding the fluids to the centrifuge, it is necessary to confirm the big solids/rock/stone/tree has been removed.
Features of GN decanter centrifuges:
1 Screw is protected by tungsten carbide tiles for longer working time, and repairable and replaceable, thickness is over 4mm
2 mud distribution port is protected by ceremic insert of abrasion
3 solids discharge port is protected by tungsten carbide ring and replaceable
4 Scraper on the centrifuge bowl end & side and Solids blocking cover to prevent it from solids accumulation outside the bowl
5 Bowl Material SS2205 made from centrifugal casting for better balance and longer life
6 High speed, high G force and variable speed can be applied for high gravity drilling mud, low gravity and barite recovery

Drilling waste are consist of drilling cuttings, waste water produced by drilling and oil storage, oily sludge, tank bottom waste, etc. GN vertical G dryer system can be used for all these types of drilling waste with our customized design. We have standard equipments just put them in different layout and use different speed( G force) to get the required result.
Firstly GN vertical cuttings dryer system will separate the oil based drilling cuttings from the materials collected from the rig site both in onshore and offshore, and get the waste water with oil, the oil content remained in the cuttings after treated by GNCD930D-VFD is around 5%, you need to transfer the cuttings to thermal unit to reduce oil content in the cuttings then disposal, otherwise you need drilling waste injection process. For the waste water with oil, a 3-phase decanter centrifuge can help to separate the oil from the waste water, and oil recovery can be re-used for the drilling fluids and save a lot of drilling cost, the waste water can be flocculation and feeding to the water treatment system.Such drilling waste water treatment process can apply both vertical cuttings dryer and decanter centrifuge or both of them, it depends on your budget of the projecct. But you should pay more attention to the solids particle size, it is very fine clay and silt solids, the vertical G dryer can not be applied, the decanter centrifuge is suitable for such situation.
The sudden crude oil price fall down caused the operators want to reduce their production cost, less the equipments’s purchasing value is a good and effective way. GN solids control with GN solids Ameria office and warehouse in Houston, provide service both for sales and rental. We have 10 units 4-panel shale shaker, 5 units of mud cleaner( desander, desilter, shaker 3 en 1), 3 units of high speed decanter centrifuge, 1 set of VFD centrifuge in stock for rental and sales, welcome to contact us at 6710 windfern road, Houston, TX 77040 or visit us at OTC 2015 Reliant Arena Hall, 6137 & 9225-2.

GN Mini Decanter Centrifuge

As everyone knows, when explore minerals the drillers usually use core drilling. The size of the holes could be arrived at from some hundred’s ft with a hundred’s ft. Diamond experts can evaluate the composition from the minerals by doing a bit of experiments around the retrieved core samples. In line with the evaluate information from the diamond experts, the drilling company can decide whether or not they will begin the drilling or find another areas.

Core drilling plays an essential role within the mineral mining. Among the key important tools throughout drilling, decanter centrifuge will help separate the drilling solids effectively.

GN mini decanter centrifuge (type GNLW 223) is really a special designed centrifuge utilized on core drilling. Because utilized in the core drilling, you will find very little solids in comparison towards the oil drilling process.

So far, you will find some nations are utilizing GNLW 223 decanter centrifuge, for example Canada, America, Chile etc. GN solids control is creating decanter centrifuge for mining gemstone core drilling, this decanter centrifuge is comparable with MI-SWACO CD250 however the cost is extremely low. So that all these offered tools to Canada, America and Chile for mining drilling information mill gathered good remarks because of their excellent performance.

Why GN mini decanter centrifuge can sell such well in Mining industry, and it has a great fame in diamond drilling industry along with the coal mattress methane drilling industry? The only real response is the big talents of the decanter centrifuge.

With this mini decanter centrifuge, the bowl diameter is nine inch and also the length is just twenty-six inch. With this particular small dimension little structure, it’s quite easy to operate and simple for maintenance.

GN has utilized wear resistance materials (SS 304) to help make the bowl of the decanter centrifuge. Certain parts are utilizing tungsten carbide for any better protection and longer existence usage.

GN also offers the big decanter centrifuge for bigger dealing with capacity, for particulars thanks for visiting e-mail us.

Related Arciels:

• GN SOLIDS AMERICA at OTC 2015
• Shale shaker details
• The knowledge about mud cleaner
• Dewatering system for water based mud
• Drilling cuttings decanter centrifuge at the jobsite

A new solids control system produced by GN solids control can save your drilling cost extremely, especially under the situation that Brent crude oil prices fell below $49 a barrel and U.S. crude also fell more than $1 on Monday after the global economic outlook darkened and Iraq announced record oil production. You have to reduce your production cost in everywhere to fight with the low crude oil price, otherwise you can not earn money and keep your business going well.

The benefits to use proper solids control equipments have been emphasized for many times, like

1 Drilling fluid maintenance cost, clean up, and disposal cost, more fluids can be reused for drilling to save your money

2 Reduce your pressure from regulations of environmen protection

3 Less the overall cost of drilling

GN solids control system can be completely customized design according to your rig model and rig site layout. We have experienced engineer team who can give you professional solutions for all kinds of drilling/ boring engineering, including oil & gas drilling, geothermal drilling, water well drilling ,coal bed methane, horizontal directional drilling, diamond core drilling.

Recently GN solids control shipped 3 sets of 1000 HP drilling rig solids control system for a drilling company in Europe, not only in Europe, our solids control system has been sold to over 60 countries in the world, and we can meet the high standard requirement for Australia, New Zealand, Europe, South America and also for offshore project.

These 3 sets of solids control systems are exported to Europe, all motors and electric control panels are ATEX certified and all machines are CE certified. GN Solids Control is one of the few companies in China who can meet such requirement. And in other developed area like North America, we provide solids control system with IEC ex certificate.

GN designed vertical G dryer waste management system can be used for both water based drilling cuttings and oil based drilling cuttings, and the field test result is proved successful. The standard vertical G dryer waste management system including: verti-G dryer GNCD930D-VFD, decanter centrifuge GNLW363CG-VFD, Nemo pump GNG30-075 for feeding the centrifuge, Nemo pump GNG10A-040 for flushing the VFD decanter centrifuge and cuttings dryer, oilfield 3-runner design skid, V type fluids collection tank and accessories. This type tank is for easy tank bottom cleaning and avoid of accumulation of solids in the tank bottom .

We have specially designed drilling waste management system for water based drilling cuttings, the benefit to apply for this system is :

1 Use Hi-G dryer to instead of Verti-G dryer, less the purchasing cost and less the electricity consumption

2 Less the flushing pump for the vertical G dryer

3 G-force of Hi-G dryer can reach 8.0G max, with 4-panel shaker screen and 2.73m2 large screen area for better separation. After treated by hi-G dryer, the liquid is feeding to decanter centrifuge directly.

But compared with Hi-G dryer, vertical G dryer treated the cuttings much drier, the solids can be removed directly by truck, but the solids separated by Hi-G dryer still remain around 40% humidity.

In water based mud treatment system, the centrifuge is normally installed on the highest telescopic frame for better solids discharge. But the shale shaker could be put it on the lower stand.

       But if for oil based cuttings, Vertical G dryer management system is the best option, we have utilized it in many rig sites in the world to test its performance, it is proved good according to our client’s feedback.

To check GN vertical cuttings dryer performance in the rigsite, pls check the video from GN website from the video page.