Category: Uncategorized

Hebei GN Solids Control Co., Ltd is the major
manufacturer of solids control equipment and leading maker of
drilling waste management equipment in China, getting the first API
certified inside China and the first produced vertical cutting dryer with
China. Because of its leading part in solids control as well as waste
management technology, Hebei GN Solids Control Company., Ltd has exported to 60
countries and entertained the largest portion in the worldwide market, thus
achieving a new famous brand GN Solids Control. Certainly, Africa especially
Nigeria is a huge market for GN, and now around 100 models decanter centrifuge
are within Africa for solids control. Recently, our sales team have become in
Nigeria doing cost service for 3 pieces drilling waste management devices on
the drilling site.

GN main product line of drilling waste management includes excessive G shaker,
vertical cutting dryer and decanter centrifuge.
GN high G shaker can reach to utmost 8. 0 G drive because the screen bed
consists of stainless steel and the whole patio is heat treated. GN vertical
cutting dryer could reach to a 750 R force at a speed involving 1200RPM so as
to dry the actual oil based drilling cutting using a oil content at all around
5%. GN decanter centrifuge is to treat the drinks discharge from high Gary the
gadget guy shaker or the vertical cutting dryer to make more clean up fluids
return back to dynamic system. Beside singe drilling waste management
equipment, GN Solids Control also
resources complete drilling waste management system with the combination of up
and down cutting dryer and decanter centrifuge on a skid attached with little
mud tank. GN provides 2 normal model of drilling waste management system for
customers’ solution, and also customized drilling waste material management
systems are available in GN. 

Among all typically the solids control
equipment, often the shale shaker and the desander or desilter cones
usually are of less technology. The coffee quality for the shale shakers often
depends on the designed construction, the material choosing and the welding
standards, like if there are pockets in the welding seam. Actually , in the
first year connected with operation, a well made shale shaker and a poorly
produced one are nearly a similar with each other. But when they are applied
longer than one year, the issues start to show. In a word, often the shale
shakers’ technology is just not so complicated.
Comparing with all the shale shaker and mud cleaner (which could
be broken down to desander cones in addition to desilter cones), the decanter
centrifuge shows a manufacturer’s producing capability to the most. Due to the
fact:
1 . there are many rotating elements in the decanter centrifuge, the actual
producing accuracy is very important towards the rotating part. And the
providing accuracy comes from the enhanced producing machines and specialist
operators and workers.
GN Solids Control as the solids control and waste material
management centrifuge manufacturer, is likewise the first one in this field
in order to invite the five deal with producing machine for the centrifuge
parts manufacturing in order to assure the accuracy.

2 . often the decanter centrifuge is involving highly speed and the nearly all
welcome speed for waste materials management centrifuge is 3200RPM. Although
many manufacturers claim that their very own centrifuges could reach broadband
up to 3200RPM, but rarely could ensure the noises and vibration during top
speed. GN Solids Control’s centrifuges are under precise make sure producing
and each one ended up being strictly inspected before shipping and delivery. So
GN’s high speed centrifuge is really high speed performance one particular.
3. a suitable length as well as diameter ratio. Normally it really is 3, and 3
is a very suitable ratio for the spend management centrifuges. For the solids
control ones for the treatment of the HGS, the middle rate and 2 of span
diameter ratio is enough. And in addition how long is the cone element affect
the treating performance.
Could you consult GN for more information.

GN solids control produce
oilfield cylindrical vessel type vacuum degasser unit which is used to remove entrapped
gas including H2S, CO2 from gas-cut drilling fluids. And protect the
centrifugal pump of mud cleaner feeding from gas cut and impeller damage.

Different with the atmospheric Degasser, the atmospheric
Degasser is centrifugal type deasser.

Features of GN Cylindrical Vessel type vacuum degasser:

(1)   Self-contained
type without jet pump

(2)   new design of Ultrasonic liquid level meter, which is automatically controlled
the mud level, when the mud level is too high or too low, it will shut down
from the electric control panel to protect the vacuum pump. The Ultrasonic
liquid level meter is connected with the control panel.

(3)   22kw prime motor and 7.5kw vacuum pump motor with electric control
panel, which is suitable for oilfield operation with temperature up to 55
degree, hazardous environmental explosion & flame proof class 1 division 1,
group C & D. If required by the client, we can also provide motor and
control panel with ATEX certificate.

(4)   Oilfield
skid mounted, smart footprint and conveneint operantion

Models of GN Cylindrical Vessel type vacuum degasser:

GNZCQ270A with
treating capacity 1188gpm, GNZCQ360A with 1584gpm treating capacity, the
cylindrical vessel diameter are all 920mm.

Working
principal of GN Cylindrical Vessel type vacuum degasser unit:

It use the suction effect of the vacuum
pump to create negative pressure inside the Cylindrical Vessel,
and the mud enter the hollow shaft. And then the mud spray to the tank wall , Gas
is discharged to safe zone from gas separator through the suction of vacuum
pump and the mud is discharged into the tank.

If you need Cylindrical Vessel type vacuum degasser unit, pls contact with GN solids control. Except
for vacuum degasser, GN also provide mud gas separator / poor boy degasser
which is used before solids control system.

As the top solids control equipments manufacturer in China, GN solids
control also produce drilling waste management equipments, like high speed
decanter centrifuge, high G force vertical cuttings dryer and shaker screens.
We have our own shaker screen factory to produce replacement shaker screens for
world famous brand oil & gas drilling shale shaker.

The shaker screens used for oil drilling is very different from the
screens for mining they are produced by orders, we can produce various mesh and
API No. for different mud treatment requirement. We usually only have wire mesh
and screen frames etc. raw materials in stock, we do not have much shaker
screens in stock, because the market’s requirement is changing everyday.

The screens types and dimensions we can produce are as below, it is only
part of our screens, we can also produce according to special required
dimensions by your sample or measured size.

(1)  
Pre-tentioned screens (45.75"
x 23") 585x1165mm steel frame screens and composite material frame screens

(2)  
49.25" x 25"
(1250mm x 635mm) steel frame shaker screen and composite material shaker
screens

(3)  
42" x 29" (1067mm
x 737mm) replacement screens

(4)  
Hook screen 41.25" x
27.5" (1048mm x 700mm) , flat type and pyramid type screens

(5)  
Steel Frame screen 35"
x 27" (890mm x 685mm) , primary screen

(6)  
Steel Frame screen 27"
x 37" (685mm x 940mm) for scalping deck

(7)  
Steel Frame screen 8" X
27" (203mm x 685mm) for dryer panel

The wire mesh screen material for option including SS304, SS316, and the
screen layers can be customized. If no special requirement, we will make it
according to our own technology and API standard.

GNZS594E-HB shale shaker use the same size screen 585x1165mm, with 4
screen panels. If you need a 4-panel shale shaker with big treating capacity,
pls contact GN solids control.

Established in the year involving 2007, GN solids
control walked through a road rich in thistles and thorns. Nowadays, GN
definitely has performed as the leader role on the China manufacturers for solids control equipment. Here we
wish to share how GN is expanding in the past 8 years, that proved GN is ready
to face larger opportunity in addition to challenge.
At the beginning of the foundation connected with GN, this company provided the
complete list of equipment for drilling mud recycling. During this period, GN’s
equipment are mainly used for olive oil drilling, what GN’s tools do is for
primary solids control on the drilling mud which called drilling essential
fluids. This type equipment are comprising shale shaker, de-sander, de-silter
and horizontal decanter centrifuge as well as some mud mixing equipment like mud agitator, mud
gun. Also many types transferring pump tend to be included in GN’s production
range.

It is well known that there are drilling to be no process if a corporation
cannot develop new technology or even launch new equipment into your market.
Focus on the not any dig market, GN created one type compact self-contained mud
system especially employed for HDD project drilling mud recycling. This system
will be ranged from 200 GPM to 1500 GPM in accordance with the treating
capacity and the settings. Australia is a market in which the no dig technology
is actually popular accepted and coming from GN’s first unit lightweight system
sent to Australia back in of 2011, over thirty units mud system currently send
there. GN’s this sort mud system are also traditionally used in Coalbed Methane
going projects. By now, GN has realized to provide the complete mud system for
both necessary oil gas drilling and trenchless drilling projects.
With the distribution of more strict control on drilling waste disposal, a
growing number of drilling contractors started to discover some solution to
recover far more drilling fluids and generate more less discharges. As a
result, there comes a new industry while using name of drilling
waste material management. The server on this business could used several
drying equipment to recover much more drilling fluids to make the going cutting
more dryer intended for easy transportation, and then further more treatment
could be done around the cuttings in special service. GN is also one of the
suppliers who always kept their eye on the market changing. In accordance with
the market request and customer’s feedback, GN launched the fresh equipment of vertical cuttings dryer and
high Gary the gadget guy force drying shaker model. After several-generation
upgrading, the device are able to be used onsite along with good performance.
Later, GN continuously issued the design of typically the skid mounted waste
management system which involves the cuttings dryer, waste centrifuge in
addition to transferring pump into one skid for easy transportation.
The actual requests from the market is generally changing, you never know what
the consumer need. By using GN’s squander management system, some shoppers get
back to GN with responses ‘can you make the system more smaller footprint, once
we don’t have enough space to put the best size skid’. Then GN’s modular design
waste management equipment came to this world. The purchaser could get separate
equipment via GN, and connect these people onsite only with a number of pipes.
This modular style and design brought great convenience to get operator onsite
as its configuration is more freely.
In order to even more reduce the cost of waste cuttings disposal and give
better remedy for the operators, GN made the new equipment solidification
device for final disposal on the waste cuttings after dealt with by the waste
management tools. After treated by the renforcement unit, the waste cuttings
could be discharged directly to get road paving, land producing, even to make
the construction content.
GN will never fear unhealthy feedback from the customers, since each critics
will force GN to a new degree. GN will never satisfy using what have been got
as it can certainly make GN mark time. With regard to larger opportunity and
concern, GN is already on the way.

Recently
we shipped one unit of 500gpm mud recycling system for water well drilling in
Middle East. With Customized color, the mud tank color is silver grey, the
equipments color is red. This is not the first order for this client, they ever
ordered a unit of trailer mounted 200gpm mud cleaning system for water well
drilling.

The
equipments list including:

1
unit of GNZS703E-DZ shale shaker

1
unit of GNZS703E-D1S8N mud cleaner

1
unit of mud agitator

1
unit of mixing hopper with mixing pump

1
unit of mud tank, with necessary stairs, handrails, walkways,  pipelines, lights.

1
unit of super charge pump to feed the clean mud to the mud pump

2
units of centrifugal pumps for feeding the desander, desilter cone

The
configuration is similar with GN standard 500gpm mud recycling system
GNMS-500G, which can be loaded into 40ft container. But this system is with
customized mud tank size, which need to be shipped by bulk cargo vessel.

The
difference between GNMS-500GL and GNMS-500G is that the mud tank size, the GL
with 40ft container size mud tank which need to be shipped by bulk cargo
vessel, but with bigger tank volume; The G system with mud tank size smaller
than container, which is convenient and cheaper for shipment.

Recently
we also shipped another 2 units of 1500gpm mud cleaning system for Tunneling
project, with the similar color. It is for construction industry.

Even
though the oil price goes down recent years, but GN solids control still got a
lot of orders from our international clients from construction industry, like
pipeline crossing, HDD, CBM, TBM, pilings, water well drilling. If you can send
us a photo of your rigsite or give us proper description of your requirement, we
have rich experience to design customized mud recycling system for different
projects.

Recently GN
solids control shipped 2 shale shakers and 2 mud cleaners for Hongkong clients,
the color is customized silver grey color which is different with our normal
green color, we can provide customized color, design, brand and nameplate for
client’s special requirement.

The desander cone, desilter cone and bottom shale shaker combination as
mud cleaner, compared with single desander, desilter , the mud cleaner with
bottom shaker which can collect useful drilling fluids and make the discharged
solids drier, and the footprint is smaller. Sometimes when shale shaker is not
working, it can be also used as back up shaker.

With different quantity desander cone and desilter cone, the mud cleaner
has different treating capacity, 1S8N with 1 of 10 inch desander cone with 8 of
4 inch desialter cone, the treating capacity is 500gpm, 2S12N with 2 @ 10 inch
desander cones and 12 @ 4 inch desilter cone with treating capacity about
1000gpm,  3S16N with 3 @ 10 inch cone(sometimes
with 2 of 12 inch desander cone) and 16pcs of 4 inch desilter cone, the
treating capacity is 1500gpm. The Hongkong client bought 2 units of 1500gpm
capacity mud cleaner with 3 desander cone, 16 desilter cones.

The shale shaker and mud cleaner bottom shaker are the same model, and
use the same size shaker screens, so the clients do not have to make different
size screens for inventory. Our most sold shale shaker models including GNZS703
& GNZS594, the former model with 3 panels screens of size 700x1250mm, the
latter model with 4 panels screens of size 585x1165mm.

Right now we have several units of GNZS594E-HB shale shaker and mud
cleaners in stock of Houston branch, welcome to visit GN solids America. With the
US Martin brand vibration motor, good quality and reliable performance is
assured.

Drilling
Mud System shipped to Russia for 1500HP drilling Rig
GN Solids Control has two branch organizations: one is in Houston, UNITED
STATES OF AMERICA and the other is in Moscow, Russia. With the establishment of
the two companies, GN furthermore opens two warehouses inside Houston and
Moscow. Currently GN Solids America has its shale shakers, decanter centrifuges
and cuttings dryers within stock, and all the replacement parts for these
solids control or even drill
cuttings management system are also available in Houston.
GN Solids Control just delivered a few solids control equipments for starters
1500HP drilling rig throughout Russia. Although the oil price are at a history
low level, several oil and gas companies are keep going in order to provide
enough job options. Considering some regions get plenty labor force which will
help to take the cost, many drilling internet businesses are still making money
for sure.
This specific 1500HP mud system involves the following equipments:
1 . GN
Shale Shaker
There are 5 shakers to do the first period separation. GN provides GNZS594E-HB
shakers for this client; the treatment of capacity of each shaker is definitely
616GPM. The fourth shaker are going to be act as a spare shaker if one of the
first three shakers will be broken, and it will be also made use of when
changing shaker screens.

GN manufactures two types shaker displays: one is metal frame screen, the other
is composite substance screen. There are 4 parts shake screens
assembled on each of your shaker. Two wedges are accustomed to fix one screen,
and that is pretty convenient for one agent to change screens.
2 . GN Decanter Centrifuge
Two units of
GN high settings decanter centrifuge GNLW363CG are given to this client.
GNLW363CG centrifuge is using duplex stainless steel twisting bowl for long
time application. The inside screw propeller is definitely fixed with hundreds
of tungsten carbide tiles for put on resistance.
When using different spinning speed, GN centrifuge enables you to recover
barite (2200RPM) in addition to cut the mud excess weight (2700RPM). Finer
cuttings preceding 2-5 microns can be in addition separated when running from
3200RPM.
Welcome to visit GN Houston warehouse for more accessible solids control and
exercise cuttings management systems.

Flare Ignition Device manufacture by GN Solids America LLC is
for blown down fuel gas designed and manufactured by us is used in burn down
excess natural gas. The flammable  gas
from collecting and distributing station of natural gas and from oil refinery and
its being a security and environmental
protection equipment. It used for have the blown down harmful gas ignited and
burned to prevent the environment and security from being endangered. The flare
ignition device, may be paired with GNZYQ 1000A Mud Gas Separator.
And now, as a developed product it has been extensively used in petroleum
drilling operation.

As said before,  Flare Igniter Device
is the safety and environmental protection equipment for handling vented
explosive gas. It can ignite the toxic combustible gas timely
and accurately. 

Flare Igniter operation safety steps for
oil drilling sites

1The flammable gas conveyed to the air intake of gas burner (torch)
through the pipeline installed at the safe area. 
2. Connect and start current transformation of flare ignition device and
electric circuit of voltage amplification. 
3. Open the liquefied gas pot and ignite fire-leading tube through
operating electronic igniter (ignition at 1st stage), or with the
fire-leading gas valve of emptying gas directly opened, ignite
fire-leading tube through electronic
igniter (ignition at 1st stage).   
4. Open gas blown down valve and ignite the blown down gas through the
flaming fire-leading tube (ignition at 2nd stage). 
5. Have the liquefied gas pot closed with fire-leading tube put out,
letting the blown down flammable gas to freely burning. 

GN Solids America LLC is manufacture who
produce full set of solids control machinery, custom Drilling
mud system, supportive machinery.
Over 60 plus countries around have use our machinery in many years and
give us repeat order business.  

GN Solids Control mud trying to recycle systems are widely used on earth. Mud
systems can be used inside oil and gas area as well as HDD, TBM Drilling, CBM
Going or Water Well Going. Last year, GN provided 2 sets of high configuration mud
recycling systems for absolutely no dig drilling to one Asian kitchenware
client. Just some days ahead of, GN Solids Control supplied another set mud
methods for one client from Filipino.
With a compact structure, this specific system is mainly used to distinct dirty
mud can get thoroughly clean water. By using this set, all of our client can
get water as far as possible, and solids can be different out for further
treating. The item mainly includes the following accessories:
1 . GN shale shaker
GNZS594E-HB, 1 set
Often the treating capacity of this shaker is 600 GPM. By making use of world
famous vibration motors such as Italian OLI or U . S . Martin, GN shaker can
also work for a quite long time with out broken.
After the mud is definitely sent to the shaker in the feeding box, the 5 pieces
shale
shaker screens may separate out most the actual solids. GN using high
quality wire mesh to creation those shaker screens so as to last longer while
also has quite a good separating performance. GN also manufactures some other
shaker screens to replacement recognized shaker screens, such as Mongoose,
Brant, Derrick etc .

installment payments on your GN decanter
centrifuge GNLW363CG-VFD, 2 sets
These only two sets centrifuges both have 1 14 inch rotating serving. Running
speed can be altered easily by using touch screen when using the VFD control
package. GN VFD box is definitely ABB or Siemens electrical products for long
life usage. Various explosion proof boxes is usually customized based on
customers’ requires, such as IEC, ATEX.
The primary variable speed centrifuge is actually rotating at a lower pace
compared with the second one. That mainly used to separate out these solids
with a larger length. On the other side, the second centrifuge is utilized to
separate finer solids with a higher speed.
3. GN Attach Pump, 2
sets
These kind of 2 screw pumps are accustomed to feed the decanter centrifuge
without agitating the mud too much. GN is using popular positive displacement
pumps Netzsch.
4. GN Mud Tank
All the above equipments tend to be fixed on one mud tank. 

Related Posts

• Different Models of GN Decanter Centrifuges
• Thermal Processing Systems Manufactures from China
  
• GN high speed centrifuge for waste water treatment
• GN Decanter Centrifuge and Cuttings Dryer Stock for sale.