Mud gun for mud tanks

Mud gun is an essential part for drilling mud tanks, it usually works
together with mud agitator/ mud mixer. The 3 main functions including :

(1)  
Mixing, prevent the solids from precipitate, the
necessary working pressure is provided by the mixing pump or mud pump,
sometimes it works together with mud agitator, for example, for mud mixing
tank, mud storage tank; sometimes it works separately when there is no enough
place to install a mud agitator.  

(2)  
Transferring, the mud gun line is designed inside
the mud tanks and connect with each tank to transfer the drilling fluids, for
example, it can work as a balance pipe between 2 tanks to keep the mud level
balanced.

(3)  
Cleaning: If connected with clear water pump, it
can be used as mud tank cleaning line after drilling is finished, so you do not
need to buy a separate jet water unit, with the GN unique mud tank bottom
design( with a 5 degree slant), the deposits solids on the tank bottom will be
washed to the side with sand washing port, and the operator can use special
tools to take the sand away.

GN solids control mud gun is with 3 nozzles and can work with 6.4Mpa for
oil & gas drilling , and 1.0 Mpa for HDD & CBM drilling. We have 2
types mud gun, one type is rotatable mud gun which can rotate with 360°, the other type is fixed. Also
we provide 2 sizes, 2 inch diameter and 3 inch diameter. The mud gun length is
customized with different size mud tanks, we will ask the client to provide
necessary information before order.

Normally GN mud gun is made of carbon steel, for special requirement of
brine water or corrosive mud, we can provide stainless steel material for
option. Welcome to inquiry GN solids America for more info.