GN Oil Drilling Solids Control Equipment

GN Solids Control mud trying to recycle systems are widely used on earth. Mud
systems can be used inside oil and gas area as well as HDD, TBM Drilling, CBM
Going or Water Well Going. Last year, GN provided 2 sets of high configuration mud
recycling systems for absolutely no dig drilling to one Asian kitchenware
client. Just some days ahead of, GN Solids Control supplied another set mud
methods for one client from Filipino.
With a compact structure, this specific system is mainly used to distinct dirty
mud can get thoroughly clean water. By using this set, all of our client can
get water as far as possible, and solids can be different out for further
treating. The item mainly includes the following accessories:
1 . GN shale shaker
GNZS594E-HB, 1 set
Often the treating capacity of this shaker is 600 GPM. By making use of world
famous vibration motors such as Italian OLI or U . S . Martin, GN shaker can
also work for a quite long time with out broken.
After the mud is definitely sent to the shaker in the feeding box, the 5 pieces
shale
shaker screens may separate out most the actual solids. GN using high
quality wire mesh to creation those shaker screens so as to last longer while
also has quite a good separating performance. GN also manufactures some other
shaker screens to replacement recognized shaker screens, such as Mongoose,
Brant, Derrick etc .

installment payments on your GN decanter
centrifuge GNLW363CG-VFD, 2 sets
These only two sets centrifuges both have 1 14 inch rotating serving. Running
speed can be altered easily by using touch screen when using the VFD control
package. GN VFD box is definitely ABB or Siemens electrical products for long
life usage. Various explosion proof boxes is usually customized based on
customers’ requires, such as IEC, ATEX.
The primary variable speed centrifuge is actually rotating at a lower pace
compared with the second one. That mainly used to separate out these solids
with a larger length. On the other side, the second centrifuge is utilized to
separate finer solids with a higher speed.
3. GN Attach Pump, 2
sets
These kind of 2 screw pumps are accustomed to feed the decanter centrifuge
without agitating the mud too much. GN is using popular positive displacement
pumps Netzsch.
4. GN Mud Tank
All the above equipments tend to be fixed on one mud tank. 

Related Posts

• Different Models of GN Decanter Centrifuges
• Thermal Processing Systems Manufactures from China
  
• GN high speed centrifuge for waste water treatment
• GN Decanter Centrifuge and Cuttings Dryer Stock for sale.

GN solids control China headquarter has shipped 1
units of solids control equipments for 1500HP oil drilling rig to Russia. Our
best sold equipments in Russia market is including shale shaker, decanter centrifuge,
centrifugal pumps, mud agitators etc solids control equipments and decanter
centrifuge, vertical cuttings dryer package etc drilling waste management
equipments. Although the world market is very slow because of the falling oil
price, because of good quality, advanced technology, user friendly design and
best service, GN solids control also sell very well in the market, the buyers
are looking for competitive price compared with US brand solids control
equipments but good quality, as the earliest and best exporter in China for
solids control equipments, GN solids control is their best choice.

The solids control equipments shipped to Russia
including:

4 units of 4-panel screen shale shaker: GNZS594E-HB,
it is also the best sold model in America market for oil industry application.
The shaker screen size is 585x1165x40mm, If you have stocked shaker screens for
this size, GN shale shaker can help you to reduce the inventory.

2 unit of GNLW363CG decanter centrifuge with
3200rpm, which is the normal working speed for solids control industry and
drilling waste management, but the max speed is 3900rpm when it is specially
required to separate fine solids smaller than 2 microns. We also provide
variable speed decanter centrifuge for option, low speed for barite recovery,
and high speed for separation of fine solids and keep the drilling fluids clean
& balance.

20 units of centrifugal pumps completed with motor,
control panel, skid, coupling and pump head. The installation dimension of GN
centrifugal pumps are equivalent with famous brand centrifugal pumps, and most
of the spare parts are replaceable, for example, mechanical seal, pump house,impellers,
etc.

Welcome to contact with GN solids control for your
potential requirement in 2016.

GN solids control produce several units of high
speed high G force cuttings dryer in stock for sale, this is the inventory
equipments for urgent orders. To provide better support for our international
clients who need the vertical cuttings dryer urgently. Since it takes a very
long time for shipment by sea from China to the client’s site, especially for
the clients in South America, it takes around 60days from Xingang, China to
Brazil. If we have these drilling waste management equipments in stock, it can
meet the client’s urgent requirement. Normally it takes 6 month to wait for a
vertical cuttings dryer produced in USA, it did not work for urgent project.

GN solids control always consider the client’s
requirement as first, we also have some of high speed( normally 3200 rpm, max
3800rpm) decanter centrifuges in stock, usually the vertical cuttings dryer and
decanter centrifuge work together in a drilling cuttings treatment system.

GNCD930D is our new generation vertical cuttings
dryer, compared with GNCD930C vertical cuttings dryer, The “D” version adopted G force 420@900rpm &  G
force 750@1200rpm, and with smaller footprint, in the drilling rig
site, especially for the offshore rig platform, there is only small area to
install the vertical cuttings dryer, GNCD930D cuttings dryer designed for user
friendly.

After treated by GN vertical cuttings dryer, the oil on cuttings (OOC) is below 5%,
which can meet the environmental standard for most countries, for some
countries with more strict rules, we provide further treatment solutions,
Thermal desorption Unit. For more details about GN TDU, pls contact GN solids sales.

Not only in
GN solids control China warehouse, we also vertical cuttings dryer and decanter
centrifuge in stock in Houston warehouse for clients in North America and South
America, welcome to visit GN solids America in Houston.

Solids control system shale shaker is different
with high G force drying shaker mainly in G force. GNZS594E-HB shale shaker
with 7.5G ( max, adjustable), in some rigs, they only use 7G is enough. But
GNZS594HGE-LD
high-G drying shaker is with 8.0G ( max , adjustable), they are with the
same effective screen area and 4 screen panels. The solids control shale shaker
is mainly used in mud
recycling system as the first phase treatment of drilling mud, the function
is to separate the big solids from the drilling fluids as much as possible and
recycle the drilling mud. The high G force drying shaker is mainly used for
water based drilling cuttings treatment to dry the drilling waste, recycle the
useful drilling fluids and let the drilling waste dry enough to be collected
and transported. Since they are using in different area of zero discharge
system, so the recommend shaker screen mesh
size is different.

The other main difference between them is the
feeding method. Normally the solids control shale shaker is feeding by pump (
in non closed loop system from mud pit) or high pressure pipeline （ in closed loop system from
rig directly）, the feed mud is with high liquid content and less
solids, so the feeding type is box feeder or weir feeder.  but for high G drying shaker, it is usually
feed by screw conveyor, which is used to collect the discharged cuttings from
the solids control shale shaker and transfer to high-G drying shaker, so the
feeding type is hopper feeder, which with big opening hopper to receive the
cuttings from screw conveyor quickly.

But the shaker screens for both shaker are same
size, GN solids America has both shale shaker and drying shaker in Houston
warehouse for sale, welcome to contact us in Houston.

Eventually investigation and customisation
regarding HDD mud
systems, at this point GN Solids Control are usually supplying more and
more modularised mud systems to the market, little customisation may meet the
needs of customer. Then more and moe buyers like the modular mud system.
Also more and more client get concern on the operation outcome, especially when
there are a lot of same item suppliers in the market, it is hard to inform the
difference from pictures, marketing and advertising advertise, as they
sometimes simply a copy, or same.
Once we always told our clients, finding is believing, you have to examine and
see the equipment, the service by yourself, then you can make a suitable
decision, have a better decision.

As have a lot of buyers, normally we have site designed for visit, just the
different spot. Different operations. Well many clients do not really like
guests.
GN Solids Control shipping one
sets standard 500gpm mud system- GNMS-500GL for you to domestic client on May
twenty fifth, 2015. This mud system already worked for over three or more
projects. Our engineer allows instruction on the installation and test, taking
back useful jobsite data. The client is a lot satisfied with GN compact mud
system.
This is the most popular mud
recycling system for HDD projects. Nearly all CPP jobs are using 500gpm mud
system, and if only the space sufficient, then they will choose this kind of
model.
What is the difference involving GN mud system along with other suppliers, as a
leader already in the market, now a lot of GN supporters claimed they can
supply precisely same products. While the heart and soul is implied in facts.
Just like GN admit all of us still have differences to meet up with the top US
brands.
To the 500GL, the client is pleased with the compact, flexible style and
design, also sweet ones including folding walkways, containerised mud tanks.
And eventually they will discover, all optimised details last longer, the
serving time frame will be longer, that preserves money.

Recently GN solids control
shipped one set of customized designed drilling cuttings solidification unit to
Africa, this is not our first unit solidification unit, pls check the previous
shipment news from here: http://www.gnsolidscontrol.com/drilling-fluids/drilling-cuttings-solidification-unit-with-high-g-dryer-for-no-pit-drilling

The main components of stabilization unit is
including: drilling waste collection hopper, cement storage box, Absorber
storage box, shear mixer, liquid feeding, mixer discharge, and skid, we can
make customized treating capacity solidification unit for your special
requirement. Our standard model GNGH-10A stabilization unit with 10m3/h
treating capacity, the unit for the Africa client is GNGH-15A with 15m3/h
treating capacity.

The main parameters of GNGH-15A solidification unit:

（1）      
shear mixer power: 45kw

（2）      
drilling waste storage volume: 5m3

（3）      
screw conveyor power: 7.5kw

（4）      
cement storage volume: 1000L

（5）      
cement screw conveyor power: 1.1kw

（6）      
absorber storage volume: 1000L

（7）      
absorber screw conveyor powder: 1.1kw

（8）      
required crane specs: 0.5tons

（9）      
total power consumption: 54.7 kw

（10）  
All the screw conveyor is with VFD control,
the  flow rate is adjustable

（11）  
The mixer tank volume: 4000L

To get more info of GN
drilling cuttings solidification unit specs, pls contact GN solids control
sales.

Why choose GN solidification unit?

(1)   
Applicable for both oil based drilling cuttings and
water based drilling cuttings

(2)   
It produced a environmentally safe and dry material
which is acceptable for landfill or land farming disposal.

(3)   
It produced a relatively dry material with steadily
structure which is cheaper for transport or disposal, it is an cost effective
way for drilling cuttings disposal if it is laws allowed in that country.

(4)   
Except for stabilization unit, GN also provide
drilling cuttings treatment system for both water based mud and oil based mud, we
could provide the turnkey solution for drilling waste disposal.

GN solids America located in 6710 winderfern road,
Houston, TX77040, welcome to visit our warehouse in Houston and consult with
our sales team.

Last month, GN Solids Control sent commissioning
engineer to a Nigerian drilling company and provided the first commissioning
service to its 4 sets newly arrived vertical
cuttings dryers. And just after commissioning, those vertical cuttings
dryers were soon put into use and they now sent back the data for the drilling
mud and cuttings before and after the treatment of the vertical cuttings
dryers.

OOC, oil on cuttings is 3.7%, much less than
the accepted value 10%. The clients are above satisfactory and now are planning
to purchase more and introduce to other friends’ companies in this field.

Function of GN Vertical Cuttings Dryers:

Like all the vertical cuttings dryers, the
vertical cuttings dryer is working like the drying procedure of the washing
machine. By rotating at a high speed, the liquid phase is splashed out through
the openings on the screen basket and collected to the storage tank for next
step separation. And the solids phase is stopped by the basket and falls down
dried and collected.

The lower value of OOC, the better
performance of the vertical cuttings dryer has. And most vertical cuttings
dryers are designed only for treating the drilling cuttings from the oil based
mud.

Unless other brands’ vertical cuttings
dryers, GNCD 930 Series vertical cuttings dryers are also suitable for WBM, although
their performance in water based mud is not as outstanding as it shows in oil
based mud. And GN is about to apply new solutions on water based mud condition
for the vertical cuttings dryer.

Why use GN Solids Control’s Vertical
cuttings dryer?

In fact this Nigerian drilling company is
not only purchasing vertical cuttings dryers from
GN Solids Control, but also using GNLW363 Decanter
centrifuges, and GN mud plants. Before getting to know GN Solids Control,
they used to use USA brand solids control equipments only, but when they
visited China and inspected several solids control manufacturers in China, they
chose GN. Since then, ll of their solids control equipments are purchased from
GN and later, the waste
management systems.

Related Posts

• Maintenance of GN vertical cuttings dryer for WBM & OBM
• Another Drilling Cuttings Vertical Cuttings Dryer Sailing for Russia
• two Package Drilling waste management instrumentation prepared delivery for continent market.
• Waste management decanter centrifuge specification

Mud gun is an essential part for drilling mud tanks, it usually works
together with mud agitator/ mud mixer. The 3 main functions including :

(1)  
Mixing, prevent the solids from precipitate, the
necessary working pressure is provided by the mixing pump or mud pump,
sometimes it works together with mud agitator, for example, for mud mixing
tank, mud storage tank; sometimes it works separately when there is no enough
place to install a mud agitator.  

(2)  
Transferring, the mud gun line is designed inside
the mud tanks and connect with each tank to transfer the drilling fluids, for
example, it can work as a balance pipe between 2 tanks to keep the mud level
balanced.

(3)  
Cleaning: If connected with clear water pump, it
can be used as mud tank cleaning line after drilling is finished, so you do not
need to buy a separate jet water unit, with the GN unique mud tank bottom
design( with a 5 degree slant), the deposits solids on the tank bottom will be
washed to the side with sand washing port, and the operator can use special
tools to take the sand away.

GN solids control mud gun is with 3 nozzles and can work with 6.4Mpa for
oil & gas drilling , and 1.0 Mpa for HDD & CBM drilling. We have 2
types mud gun, one type is rotatable mud gun which can rotate with 360°, the other type is fixed. Also
we provide 2 sizes, 2 inch diameter and 3 inch diameter. The mud gun length is
customized with different size mud tanks, we will ask the client to provide
necessary information before order.

Normally GN mud gun is made of carbon steel, for special requirement of
brine water or corrosive mud, we can provide stainless steel material for
option. Welcome to inquiry GN solids America for more info.

GN Solids Control participates inside
centrifuge tender in May this year. After competing compared to other China
brands & US ALL brands, like Derrick centrifuge, Swaco
Centrifuge, Brandt Centrifuges, GN Solids Control
Centrifuge win the tender. That year lower oil value, every company is
affected by the situation and they tend to select more cost-effective products.
After 3-4 months tender period, they pick GN Solids Control brand name and give
this right to your oil service company. The local essential oil service company
came to China, checking out our company and releasing obtain in Oct, 2015. This
may not be big order for our corporation, but repeatedly helps to confirm the
quality and reasonable tariff of GN Solids Control gear.
The new order of 2 value packs GNLW363CG-VFD centrifuges including beneath
items.

1) 2 units GNLW363CG-VFD centrifuges, high speed stepless adjustment from 0 to
be able to 3200rpm. The centrifuge can be used for solids control software.
When recovery barite, the consumer can put it around 1800RPM; when cut mud
excess weight, the user can put it all-around 2500RPM; When remove quite fine
solids, the user may put it around 3000RPM.
2) 4 sets screw send. 2 sets pump regarding feeding centrifuges, another a
couple of sets screw pump to get backup. At drilling internet site, time is
money. Along with backup solutions, this can be assurance and save a lots with
regard to drilling.
3) 1 year replacement parts for 2 sets centrifuge along with 2 sets screw pump
motor. Spare parts is also very important with regard to centrifuge operation.
It is better order it together when obtain equipment. Spare parts purchased on
their own may lead to high extra bear cost or project suspending.
Except for this two models VFD centrifuges, the end consumer is considering
more get of GNLW363CG high speed and also fixed speed centrifuges, Up and down
cuttings dryer, cuttings renforcement units etc .
From the year of 2007, GN Solids Control arrived to solids control & drilling
waste management equipment company field. During past main years, GN Solids
Command committed herself to top quality products and reasonable price, for you
to compete with US / Eu solids control brands. And now we achieved very good
results, major project as below:
1) Baker Hughes big purchaser: 4 sets centrifuges and also vertical
cuttings dryer to get Baker Hughes, the US models big oil Service Company
2) Halliburton big buyer: several sets centrifuges & two shale
shakers & one sets liquid mud grow system (with 4 major mud tanks) for
Halliburton, the US brands oil service provider.
3) CNPC and Sinopec: Because of new regulations GN supplied over 40 DWM system
to China sector from middle of 2014 to Middle of 2015, GN is the leading
Supplier regarding DWM
4) CPP huge buyer: over 30 value packs 500gpm mud system with past 3-5 years
regarding CPP, China largest HARD DISK DRIVE contractor.
……
For more info, could you contact us – GN Solids Control sales team to get
better assist

Related Posts

• Drilling Waste cuttings Decanter Centrifuge
• GN Equips the Solids Control Equipment with Own Fabricated Control Panel
• GNLW363C-VFD Decanter Centrifuge Sailing for South Asia
• 2 sets Big Bowl Centrifuge intended for Australia Customer
  

This week GN solids control shipped
one set of solids control system to Asia country,

Including one set of high G force linear motion
shale shaker GNZS594E-HB, 2 sets of variable speed decanter centrifuge
GNLW363CG-VFD with 2 sets of feeding pump, 1 unit of catch tank. It is not
traditional solids control system for oil & gas drilling, like GN standard
& customized designed solids control system for drilling rigs from 250HP to
3000HP. The traditional solids control system will at least include 2 or 3 or 4
sets of shale shaker, with
desander, desilter or mud cleaner, vacuum degasser, the
centrifuge is as an option, also the mud mixing tank & storage tank. The
purpose to use 2 units of VFD decanter centrifuge is to separate the fine
solids from the drilling fluids and get the water be re-used for drilling.

GN solids control is specialized in design customized solids control
system for different models drilling rigs, both for oil & gas drilling and
non-oil industry drilling, like water well drilling, no-dig drilling. In recent
years, our main products changed to drilling
waste management system/ equipments which combined with solids control
system as zero-discharge system or called pitless drilling cuttings treatment
system. The function of pitless system is to prevent the earth from hazardous
drilling waste, especially to protect the under-ground water and earth. The
traditional oil drilling will need to dig a hole under the ground to remain the
drilling waste, and use the truck to transfer the drilling cuttings to the
drilling waste treatment facility. It will damage the environment in 2 aspects:
1) it may pollute the underground water & earth 2) it may spray outside
from the truck during shipment and pollute the farmer’s earth nearby 3) it will
increase the drilling waste management cost, so increase the total drilling
cost and reduce the profit.

To get more information about GN solids
control system and pitless drilling mud system, pls contact GN solids sales.

Related Posts

• Most Efficient Equipment Used for Solids Control & Waste Management
• GNLW363C-VFD Decanter Centrifuge Sailing for South Asia
• Most Efficient Equipment Used for Solids Control & Waste Management
• GN Solids Control will attend ADIPEC oil show in 2016